İçeriğe geç

Fix 'PDP authentication failed' on your travel eSIM

PDP authentication failed? Bars without data. Fix the travel data line, Data Roaming, then match APN from My eSIMs Activate.

PDP authentication failed means your phone found a cell tower but could not open a data connection. On a travel eSIM (a digital prepaid data SIM), that usually means the wrong data line is selected, Data Roaming is off on that line, or the plan never finished activating. Fix those before you delete the profile.

What the error actually means

Signal bars are not the same as working data. The handset reached a visited network, then failed to start internet on that line. Maps and chat stay offline even when the status bar looks fine. SimJuno plans are data-only (no calls or SMS on that line), so keep your home SIM for bank codes while you debug the travel line.

Point Cellular Data at the travel eSIM

On Dual SIM phones, open Cellular (iPhone) or Network and internet / SIMs (Android) and set Cellular Data to the travel eSIM. Leave the home line on for SMS if you need one-time codes. Turn Data Roaming off on the home line while you test so you do not burn home-carrier roaming by mistake.

Turn Data Roaming on for the travel line

SimJuno destination pages and the in-dashboard Get Help article on activating an eSIM tell you to install with the QR, then when you land turn the eSIM line on and enable Data Roaming for that line. Many prepaid travel packs need that toggle even though you already paid. Toggle roaming off and on once, wait about a minute, then retry a simple website. If bars return but browsers still fail, go to the next check.

Match the APN shown in My eSIMs

APN means access point name: the network label your visited carrier expects for data. On SimJuno you do not guess it from a forum. Sign in, open My eSIMs in the dashboard, tap your destination card, then Activate. Under Configuration, copy the APN shown for your pack (a live Japan pack shows mobile.three.com.hk, with roaming from HK) and compare it to Cellular or Mobile network APN on the phone. If the phone already matches the dashboard value, leave APN alone. Public destination pages list data amount, validity, speed, and networks on the plan card; the install steps cover QR plus Data Roaming. For the APN itself, use the Activate screen for your line.

Reset the radio before you delete the eSIM

If the data line, roaming, and the dashboard APN look correct, toggle Airplane Mode for 15 seconds. As a later step, reset network settings (you will rejoin Wi-Fi passwords). Avoid deleting the eSIM until support confirms the profile is bad. Each eSIM install is typically one-shot, so a delete can end the pack.

Quick checklist before you contact support

  • Cellular Data points at the travel eSIM, not the home line.
  • Data Roaming is on for the travel line; off for home if you are not using home roaming.
  • In My eSIMs, open Activate and confirm the Configuration APN matches what the phone shows for that line.
  • You have not deleted the eSIM; soft resets came first.

When you want data ready before landing, pick a destination pack such as the Japan eSIM plans on SimJuno, install the QR from email or My eSIMs early, and flip roaming on only when you arrive. For more trip setup notes, see SimJuno travel guides.